Battery car customization

The final step is the final assembly process. According to the installation platform planned by the product development part, plan the standard dimensions of tooling equipment and material box and attach the number of all installation sheath and accessories to the material box to improve the installation efficiency. Battery car harness

The number of USB data lines is increasing with the development of globalization. In order to meet the needs of customers, the wire conductor and terminal conductor are thicker and the material is better. Therefore, the price is more expensive! Technically, in the future, there is the possibility of wireless alternative to cable, that is optical signal instead of electrical signal. But the signal strength, anti-interference and encryption technology are not mature.

The technical content and quality of the battery car harness have gradually become an important index to evaluate the battery function. The manufacturer should pay special attention to the selection of wire harness, and it is necessary to understand the technology and production of the harness of the battery car

The electronic harness processing the wire harness of the battery car is in the process of assembling, which is in accordance with certain principles. Therefore, some points that need attention during the assembly of the wire harness are arranged: the battery car harness

The two kinds of polyethylene base material are different, and the medium wall pipe is soft. Finally, due to many differences above, there are many different usage of heat shrinkable middle wall pipe and heat shrinkable casing. The heat shrinkable middle wall pipe is mainly used in the central connection of cable, and can also be used in other products such as battery car, and the heat shrinkable casing is basically used as the inner sheath of cable center connection. At the same time, the heat shrinkable middle wall tube is used abroad, and the domestic market is not very large.

1. When assembling, do not pull the harness too tightly, so as to prevent the vehicle from bumping again while traveling, forming the displacement of the fixing point of the harness, and then causing the distance between the two fixed points to increase,

If the square millimeter number is multiplied by 5, if the copper wire is, it will be upgraded to a gear, for example, the copper wire with 2.5 square square meters is calculated according to 4 square meters. All the above 100 are the cross-sectional area multiplied by 2, and the wire harness of the battery car is multiplied by 4 under 25 square meters

From the development of industrial intelligence, the slogan of Internet is "everything is connected"! It is also creating the Internet of things. What industrial enterprises are doing is to build intelligent equipment. In short, the demand for USB wire is that it is necessary to connect various low voltage power lines and signal wires to connect various induction elements to complete. We all know that the terminal planning is precise, and slight touch will lead to deformation, which will lead to installation difficulties and severe electrical function